Saru Aikoh Chemicals Limited Meerut, Uttar Pradesh

Send SMS
Contact Us

Cover Fluxes

Grain Refiners

Grain Refiners

Approx. Rs 21 / Kilogram(s)

Specification:
A-2Titanium-Boron base Grain Refiner for Hypo-eutectic Alloy.0.1 - 0.2%
A-2BOnly Boron based Grain Refiner for Hypo-eutectic Alloy.0.1 - 0.2%
A-113(P)Phosphorus base Grain refiner for Hyper Eutectic Alloy.0.2 - 0.4%
A-113(M)
A-4HDiluted version of A-20.1 - 0.2%

Modifier

Modifier

Approx. Rs 51 / Kilogram

Specification:
A-129Modifier for A1 - Si eutectic Alloy containing Silicon in the range of 10 to 13% for high Operating Temperature (790° - 800° C)1.5%
A-136Modifier for A1- Si eutectic Alloy containing Silicon in the range of 10 to 13% for lower Operating Temperate (740° - 750° C)Upto 1.5%
A-58Modifier for operating temperature at or less than 750° CUpto 1.5%

Magremover

Magremover

Approx. Rs 62 / Kilogram

Specification:

Cover Fluxes

Cover Fluxes

Approx. Rs 30 / Kilogram(s)

These cover fluxes are formulated for preventing formation & removal of oxides and other inclusion. It also prevents molten Aluminium from turning into dross.

Specification:
A-IFCovering and drossing flux for Aluminium Alloy for melting in Crucible/Electric Furnace.0.5 -1.0%
A-1Less exothermic than A-1F for reverberatory furnace0.5 -1.0%
A-4For melting of turning and borings. It prevents oxidation and gas absorption during melting.5 - 10% or as per practice
A-5For covering specially for reverberatory furnace.05. - 1.0%
A-6Covering flux for Al.Mg, Alloy for reverberatory furnace.2 - 3%
A-8Furnace cleaning flux, removes oxide build up from furnace wallused once per week, sprayed on the dross depending upon oxide build up
A-224(50)Drossing flux for A1-Mg Alloy0.25%
A-56Exothermic Cover Flux For Bogie treatment for general melting for higher recovery of A1-metal from dross.5 - 10%
A-224(1)Injection flux to be used by FLUX FEEDER MACHINE for better drossing and removal of oxides & other inclusions right from bottom of the furnace.


Degassers

Degassers

Approx. Rs 120 / Kilogram

Specification:
D-6A low fume, slow bubble degassing agent, specially for reverberatory furnaces.0.15 - 0.20%
D-20/D-40Exceptionally strong Degasser for a very wide range of products.0.15 - 0.25%
D-54For Na and Ca removal0.20 - 0.60%
D-19/D-41General purpose Degassing-cum-Grain refining agent for all Alloy.0.15 - 0.25%
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Cover Fluxes ?

    country-ico

    We will contact you soon !

    Kanishk Jain

    (Director)

    Saru Aikoh Chemicals Limited

    Partapur, Meerut, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us